AFT-P05 Single Arm Laparoscopic Tower

Enterprise through ISO13485; ISO9001; EU CE; national electrical safety and electromagnetic compatibility dual certification; AAA credit enterprise; high-tech enterprise.

Tower series

With the development of minimally invasive technology, endoscopic technology has been widely used in the field of general surgery, urology, gynecology, thoracic surgery and other surgical treatment. As a bearing platform for the endoscopic treatment equipment, the endoscopic tower provides a full range of service for the surgical work. The cavity tower adopts ceiling suspension, high bearing capacity, the tower and transverse arm can rotate 340 degrees, and brake anti-drift, the tower is equipped with multi-layer equipment platform, medical gas, power supply, network output terminal; the tower height can be controlled control, easy to use.

The essential air supply medical equipment in the modern operating room of the hospital is mainly used for the terminal transfer of medical gases such as oxygen supply, suction, compressed air, nitrogen and other medical gases in the operating room. The main advantages of the product: the balanced design ensures the level of the equipment platform and ensures the safety of the equipment.

■ Product Features

-The main material of the hanging tower is made of high strength aluminum alloy, and the shape is fully enclosed. The material used is corrosion prevention, with long service life, easy to clean and disinfect, and can prevent pollution.

-There is no relative movement between the power lines and gas lines of the tower body, and all the power lines and gas lines must not be exposed in the tower, so the tower can ensure that the tower will not lose the line due to the change of position.

-All gas sockets and configurations are optional structures, and various gas sockets are of different colors and shapes. Socket plug can ensure more than 20,000 times of plug and pull, low maintenance cost.

-The power supply of the tower is single-phase 220V power supply, all the towers are equipped with good braking system, which strictly eliminates the possibility of drift of the tower, the rotation Angle of 340°, and has a good limit system and carrying capacity of 220kg, long-term use under full load state without deformation.

Conventional air terminals and power outlets areNational standard standard, can be configured according to customer requirements other standard air source terminals and power sockets.

Before placing an order, please clarify the height of the room and the required bracket installation height, so that the manufacturer can make the corresponding tower length and support length according to the data.