AFT-P02 Dry and Wet Separation Suspension Bridge

Share this page

AFT-P02 Dry and Wet Separation Suspension Bridge

ICU beam suspension bridge is used in ICU ward of hospital. It is a necessary medical rescue auxiliary equipment in modern intensive care unit. It is mainly composed of bridge, dry section and wet section. It is characterized by reasonable dry and wet separation structure and flexible lifting infusion frame in the wet area. The dry and wet area is equipped with a platform for lifting and adjusting, with oxygen, air, attraction, power supply, network output terminal and infusion pump rack distributed in the dry and wet area. Various systems can also be selected according to the requirements of the hospital

Category Medical Pendant and ICU Bridge System

Tower series

The essential air supply medical equipment in the modern operating room of the hospital is mainly used for the terminal transfer of oxygen supply, suction, compressed air, nitrogen and other medical gases in the operating room. The main advantages of the product: the balanced design ensures the level of the equipment platform and ensures the safety of the equipment.

■ product features

The main material of the crane tower is made of high strength aluminum alloy, and the shape is fully enclosed. The material is corrosion prevention, long service life, easy to clean and disinfect, and can eliminate pollution.

There is no relative movement between the power lines and gas lines and the tower body, and all the power lines and gas lines must not be exposed in the tower body, so as to ensure that the tower will not change the line in the process of movement.

All gas sockets and configurations of the tower gas terminal are optional structure, and various gas sockets are of different colors and shapes. Socket plug can ensure more than 20,000 times of plug and pull, low maintenance cost.

The power supply of the crane tower is single-phase 220V power supply, and all the crane towers are equipped with good braking system, which strictly eliminates the possibility of drift of the crane tower. The rotation Angle of the crane tower is 340°, and it has a good limit system and a carrying capacity of 220kg, which is not deformed for long-term use under full load state.

Conventional air terminals and power outlets areNational standard standard, can be configured according to customer requirements other standard air source terminals and power sockets.

Before placing an order, please clarify the height of the room and the required bracket installation height, so that the manufacturer can make the corresponding tower length and support length according to the data.

Main technical parameters and configuration:

1. Working power supply: AC220V, 50 HZ;

2. Cross beam length: 2600~2800mm (actual size is subject to the user measurement); 2 lights; 8 power sockets

3, the with braking device, the equipment has no drift, the equipment can easily move when loosening;

4、Hanger-type dry section tower: 1. The configuration is as follows:

⑴ Instrument platform: 2 layers (height adjustable)

⑵ Standard configuration of gas terminal: (2 oxygen, 2 suction, 2 air) (optional import terminal)

A. The interface has different colors and shapes, and has the function of preventing error connection;

B. plug and pull more than 20,000 times;

C, use secondary seal, with three states (through, break, pull), can be maintained with gas;

(3) Ground terminal: 1;

(4) Network interface: RJ45 1; telephone interface: 1

(5) 2 light lights;

(6) 1 drawer;

(7) Rotary: 0~340°;

(8) The net load weight of the dry section tower is 80kg;

(9) All gas terminals, power interfaces and weak current interfaces are placed on the terminal box, electricity and gas are separated, power supply and gas source are installed on the aluminum alloy column of the tower body.

5, hanging column type wet section tower: 1. The configuration is as follows:

(1) Standard configuration of gas terminal: (2 oxygen, 2 suction, 2 air)

A, with the function of anti-error connection;

B. plug and pull more than 20,000 times;

C, use secondary seal, with three states (through, break, pull), can be maintained with gas;

(2) 1 grounding terminal;

(3) 1 stainless steel adjustable infusion rod frame;

(4) 2 stainless steel adjustable injection pump racks; with 8 infusion bottle hooks

(5) Rotary: 0~340°;

(6) The power interface is on both sides of the tower body, and the gas source is distributed at the back of the tower body, fully realizing the separation of electricity and gas to ensure the safety of the equipment

6, the main material adopts high strength aluminum alloy profile;

7, the surface treatment using electrostatic spraying.